Err

Cable testers for every type of cable and everyone
Your cart 0 £ 0.00

AudioJoG Pro 3

(Code: 0001023)
£ 53.00
(-11.32%) £ 47.00
In Stock
Add to cart
AudioJoG Pro 3AudioJoG Pro 3
Features:
There are 2 rows of 4 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections.
Connectors:
3pin XLR
1/4" Stereo Jack
RCA Phono sockets
Memory:
There are 4 LED's indicating the state of the MEMORY option.
If the MEMORY LED is on, then AudioJoG Pro 3 automatically scans all the connections and compares against information held with just one press of the test button.
MEMORY works in single  and double ended test modes.
INTERMITTENT fault detection uses the memory to continuously test the cable until a fault is found.
Test Modes:
Double ended - both ends of the cable under test areplugged into the AudioJoG Pro 3
Single ended - ended - one end of the cable under test isplugged into AudioJoG Pro 3 the other into another AudioJoG Pro 3 or any other compatible AudioJoG tester

Specification, Double {Single} ended:
Continuity and Short Circuits, less than 255K {75K} ohms
Open Circuits (end to end and between connected pins), greater than 255K {75K} ohms
Less than 2 {5} second test time
Sturdy METAL BOX construction
L 97mm W 83mm D 50mm
Uses 9v PP3 battery (not supplied)

 
Click to download Manual

Click to download Leaflet