CableJoG 64 Cable Testers

(click pic to enlarge)

The first of our cable testers, CableJoG 64 can test up to 64 individual connections of all manufacturers of connectors. This simple test instrument stores up to 55 separate connection configurations. Each cable that is tested is compared with the configuration stored in the cable testers memory to produce a pass/fail indication of each pin connection.

Each test result can be transferred to a PC or printer via a comms link to store, tabulate and print test information from the CableJoG cable testers software that is provided.

Each test unit can be configured to the customers requirements by producing a loom of connectors that the customer readily uses, therefore forming a versatile test instrument.

CableJog 64 cable testers technical information:

CONNECTOR PINS: 2 x 64way via a standard IDC header (2 x 34 each way)
KEYBOARD: 4 x 4 Keyboard; 0 to 9, 4 cursor keys, Clear & Enter
DISPLAY: 1 Line 16 Character Alphanumeric LCD Backlit Display
PROCESSOR Z80 CMOS: Real Time Clock and Serial I/O
MEMORY 32K EPROM, 32K RAM
POWER
- Integral 9V Nicad
- External 'Plug Top' 300 mA Power Supply
- 5 year Lithium [Memory Backup]
DIMENSIONS
- Width: 310mm Length: 180mm Depth: 60mm
OPTIONS
- CableJoG Command Programme (C.C.P.)
- Windows™ based Cable/Cable Harness Test and Document Programme

LEARN
Plug in your cable and learn the connections. The connections and any default settings are held in compare memory.

PROBE
Using a wire connected to one of the CableJaoG's pins it is possible to 'probe' or 'bell out' the a cable or partial cable where only one end is a connector available for connection to the unit.

TEST
Plug in another cable and run a comparison between it and the details held in compare memory. The test can be run once, looped till fail or continuously allowing several cables to be tested without further keystrokes or staged, where a cable can be tested to a given stage and, once passed the next stage is automatically loaded and testing continues until completed. Results can be displayed on the unit, printed out or saved and later transferred to a 'PC'.

RECALL
Call up one of fifty five previously stored cable connection details.

EDIT
Change or modify any of the cable details in compare memory; Connector pin numbers and locations, serial number, date and time stamp, type of test run, and cable connections.

STORE
Transfer details in compare memory to one of fifty five locations in the database memory.

PRINT
Either ON-LINE for continuous result logging and label printing. Or OFF-LINE (batch mode) for when the unit is not connected to a printer.

RECEIVE
Get cable details from the 'PC', which can hold an unlimited number.

SEND
Send cable dtabase to the 'PC' for achiving or transferring to another unit. Send cable test results to the 'PC' for further analysis.

SETUP
Configure the unit to work the way you want.

Home - Cable tester Products - Cable Testers - Cable Testing Equipment - Technical tester data

CALL US NOW! 01925 764471
Or we'll pay for the call! Please fill in the form below for a rapid response during normal office hours.
Name:
Tel. No.:
Email: