Audio Cable Testers

AudioJog Pro Audio Cable Testers

ALL new AudioJog audio cable tester with SINGLE & DOUBLE ended testing.

Connectors:
3 Pole XLR Male and Female
6.35mm Jack, stereo or mono
Single or Twin 4.4mm Bantam, stereo or mono
3.5mm Jack, stereo or mono
4 Pole Speakon (TM)
DIN 180° 3 & 5 Pole
RCA Phono
BNC

Features of the AudioJog Pro audio cable tester:
There are 2 rows of 6 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections.

Memory option:
There are 3 LED's indicating the state of the MEMORY option.
If the MEMORY LED is on, then AudioJoG Pro automatically scans all the connections
    and compares against information held with just one press of the test button.
MEMORY works in both test modes.

Test modes:
DOUBLE ENDED - both ends of the cable under test are plugged into AudioJoG Pro.
SINGLE ENDED - one end of the cable under test is plugged into AudioJoG Pro the
    other into another AudioJoG Pro or the 19 inch rack mount AudioJoG Rack.

Specification Double {Single} Ended:
Continuity and Short Circuits, less than 255K {75K} ohms
Open Circuits (end to end and between connected pins), greater than 255K {75K} ohms.
Less than 2 {5} second test time
L 197mm W 110mm D 50mm
Uses 4 x AAA batteries (not supplied)