CCTV Cable Testers

VideoJoG CCTV Cable Tester

Video Cable Tester with Memory & Adaptor Panels

VideoJog CCTV Cable Testers

Features:
There are 2 rows of 21 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections.

Connectors Left Side:

SCART
4way mini DIN
5way mini DIN
5way DIN
6way DIN

Connectors Right Side:

SCART
4way mini DIN
8way mini DIN
Phono x 6
BNC x 2

Specification:
Continuity(end to end) less than 4.7K ohms.
Short Circuits (end to end) and between connected pins, less than 4.7K ohms.
Open Circuits (end to end) and between connected pins, greater than 10K ohms.
Less than 5 seconds test time.
Non-volatile memory feature.
L 265mm W 223mm D 40mm.
Uses 4 x AAA battery (not supplied).

VideoJoG CCTV Cable Tester Adaptors:

	HR10/10A Adaptor Panels: HR10/10A 7R 4way HR10/10A 7R 6way HR10/10A 10R 12way HR10/10A 13R 20way Both male and female.
	2.54 SIPS Adaptor Panels: 2.54mm or 0.1" pitch connectors Colour coded Up to 21 ways 12 rows in parallel, allowing for either 12 different size/types of connector, or up to 11 spares ready for when the first wears out.
	3.96 SIPS Adaptor Panels: 3.96mm or 0.156" pitch connectors Colour coded Up to 21 ways 6 rows in parallel, allowing for either 6 different size/types of connector, or up to 5 spares ready for when the first wears out.

General:
Panels can be mixed and matched
Any connector can be wired into the SIPS panels