Cable testers and cable test equipment

CableJoG 64

CONNECTOR PINS: 2 x 64way via a standard IDC header (2 x 34 each way)
KEYBOARD: 4 x 4 Keyboard; 0 to 9, 4 cursor keys, Clear & Enter
DISPLAY: 1 Line 16 Character Alphanumeric LCD Backlit Display
PROCESSOR Z80 CMOS: Real Time Clock and Serial I/O
MEMORY 32K EPROM, 32K RAM
POWER
- Integral 9V Nicad
- External 'Plug Top' 300 mA Power Supply
- 5 year Lithium [Memory Backup]
DIMENSIONS
- Width: 310mm Length: 180mm Depth: 60mm
OPTIONS
- CableJoG Command Programme (C.C.P.)
- Windows™ based Cable/Cable Harness Test and Document Programme

LEARN
Plug in your cable and learn the connections. The connections and any default settings are held in compare memory.

PROBE
Using a wire connected to one of the CableJaoG's pins it is possible to 'probe' or 'bell out' the a cable or partial cable where only one end is a connector available for connection to the unit.

TEST
Plug in another cable and run a comparison between it and the details held in compare memory. The test can be run once, looped till fail or continuously allowing several cables to be tested without further keystrokes or staged, where a cable can be tested to a given stage and, once passed the next stage is automatically loaded and testing continues until completed. Results can be displayed on the unit, printed out or saved and later transferred to a 'PC'.

RECALL
Call up one of fifty five previously stored cable connection details.

EDIT
Change or modify any of the cable details in compare memory; Connector pin numbers and locations, serial number, date and time stamp, type of test run, and cable connections.

STORE
Transfer details in compare memory to one of fifty five locations in the database memory.

PRINT
Either ON-LINE for continuous result logging and label printing. Or OFF-LINE (batch mode) for when the unit is not connected to a printer.

RECEIVE
Get cable details from the 'PC', which can hold an unlimited number.

SEND
Send cable dtabase to the 'PC' for achiving or transferring to another unit. Send cable test results to the 'PC' for further analysis.

SETUP
Configure the unit to work the way you want.

CableJoG 128

LEARN
Plug in your cable and learn the connections. The connections and any default settings are held in compare memory.

RECALL
Call up one of fifty five previously stored cable connection details.

EDIT
Change or modify any of the cable details in compare memory; Connector pin numbers and locations, serial number, date and time stamp, type of test run, and cable connections.

STORE
Transfer details in compare memory to one of fifty five locations in the database memory.

PRINT
Either ON-LINE for continuous result logging and label printing. Or OFF-LINE (batch mode) for when the unit is not connected to a printer.

RECEIVE
Get cable details from the 'PC', which can hold an unlimited number.

SEND
Send cable dtabase to the 'PC' for achiving or transferring to another unit. Send cable test results to the 'PC' for further analysis.

SETUP
Configure the unit to work the way you want.

CableJoG 256

CONNECTOR PINS: 4 x 64way via a standard IDC header (2 x 34 each way)
KEYBOARD: 4 x 4 Keyboard; 0 to 9, 4 cursor keys, Clear & Enter
DISPLAY: 2 Line 16 Character Alphanumeric LCD Backlit Display
PROCESSOR Z80 CMOS: Real Time Clock and Serial I/O
MEMORY 32K EPROM, 32K RAM, 12 cable memory store
POWER
- External 'Plug Top' Power Supply
- 5 year Lithium [Memory Backup]
DIMENSIONS
- Width: 470mm Length: 180mm Depth: 60mm
RS232 - Printer / PC Link

LEARN
Plug in your cable and learn the connections. The connections and any default settings are held in compare memory.

RECALL
Call up one of twelve previously stored cable connection details.

EDIT
Change or modify any of the cable details in compare memory; Connector pin numbers and locations, serial number, date and time stamp, type of test run, and cable connections.

STORE
Transfer details in compare memory to one of twelve locations in the database memory.

PRINT
Either ON-LINE for continuous result logging and label printing. Or OFF-LINE (batch mode) for when the unit is not connected to a printer.

RECEIVE
Get cable details from the 'PC', which can hold an unlimited number.

SEND
Send cable dtabase to the 'PC' for achiving or transferring to another unit. Send cable test results to the 'PC' for further analysis.

SETUP
Configure the unit to work the way you want.

CableJoG 512

512 test pins.
Connector pins
- 8 64 way via a standard IDC header.
Continuity
- Less than 27K ohm
Keyboard
- 4 x 4 keyboard; 0 to 9, 4 cursor keys, clear & enter
Display
- 4 line 20 character alphanumeric LCD, backlit display
Processor
- Z180
Memory
- 1MByte RAM
- 59 cable memory store
RS232-1
- Printer link
RS232-2
- PC or Keyboard/display link
Power
- External 'Plug Top' power supply.
- 5 year Lithium (memory backup)
L 230mm W 120mm D 25-40mm (keyboard/display)
L 200mm W 430mm D 50mm.

LEARN
Plug in your cable and learn the connections. The connections and default test settings are held in compare memory.

PROBE
Use a nominated pin as a 'probe', the display shows connections made .

TEST
Plug in another cable and run a comparison between it and the details held in compare memory. The test can be run once, looped till a fail, or continuously allowing several cables to be tested without further key strokes. Results can be viewed, printed out or saved and later transferred to a 'PC'.

RECALL
Call up one of thirty previously stored cable connection details.

SETUP
Configure the unit to work the way you want.

EDIT
Change or modify any of the cable details; Connector pin numbers and locations, serial numbering,date and time stamping, type of testing and cable connections.

STORE
Transfer details in compare memory to one of thirty locations in the database memory.

PRINT
Either ON-LINE for continuous result logging and label printing, Or OFF-LINE for when the unit is not connected to a printer.

RECEIVE
Get cable details from the 'PC' which can hold an unlimited number.

SEND
Send a cables details to the 'PC', for archiving or transferring to another unit.

CableJoG 1024

1024 test pins.
Connector pins
- 16 64 way via a standard IDC header.
Continuity
- Less than 47K ohm
Keyboard
- 4 x 4 keyboard; 0 to 9, 4 cursor keys, clear & enter
Display
- 4 line 20 character alphanumeric LCD, backlit display
Processor
- Z180
Memory
- 1MByte RAM
- 59 cable memory store
RS232-1
- Printer link
RS232-2
- PC or Keyboard/display link
Power
- External 'Plug Top' power supply.
- 5 year Lithium (memory backup)
L 230mm W 120mm D 25-40mm (keyboard/display)
L 200mm W 430mm D 50mm (CableJoG 512 and CableJoG 512 Plus)

LEARN
Plug in your cable and learn the connections. The connections and default test settings are held in compare memory.

PROBE
Use a nominated pin as a 'probe', the display shows connections made.

RECALL
Call up one of fifty nine previously stored cable connection details.

SETUP
Configure the unit to work the way you want.

EDIT
Change or modify any of the cable details; Connector pin numbers and locations, serial numbering,date and time stamping, type of testing and cable connections.

STORE
Transfer details in compare memory to one of fifty nine locations in the database memory.

PRINT
Either ON-LINE for continuous result logging and label printing, Or OFF-LINE for when the unit is not connected to a printer.

RECEIVE
Get cable details from the 'PC' which can hold an unlimited number.

SEND
Send a cables details to the 'PC', for archiving or transferring to another unit. Send cable test results to the 'PC' for further analysis.

RibbonJoG

Cables fitted with any of the following connectors may be checked:

10 Way 14 Way 16 Way 20 Way 26 Way
34 Way 40 Way 50 Way 60 Way 64 Way

Continuity (end to end), less than 4.7k ohms
Short Circuits (end to end and between connected pins) less than 4.7k ohms
Open Circuits (end to end and between connected pins) greater than 10k ohms
Less than 5 seconds test time
Minimum distance between connectors of same size only 130mm
Non-volatile memory feature
L 290mm W 143mm D 50mm
Uses 4 x AAA battery (not supplied)

AudioJog Pro

Connectors:
3 Pole XLR Male and Female
6.35mm Jack, stereo or mono
Single or Twin 4.4mm Bantam, stereo or mono
3.5mm Jack, stereo or mono
4 Pole Speakon (TM)
DIN 180° 3 & 5 Pole
RCA Phono
BNC

Features:
There are 2 rows of 6 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections.

Memory option:
There are 3 LED's indicating the state of the MEMORY option.
If the MEMORY LED is on, then AudioJoG Pro automatically scans all the connections
and compares against information held with just one press of the test button.
MEMORY works in both test modes.

Test modes:
DOUBLE ENDED - both ends of the cable under test are plugged into AudioJoG Pro.
SINGLE ENDED - one end of the cable under test is plugged into AudioJoG Pro the
other into another AudioJoG Pro or the 19 inch rack mount AudioJoG Rack.

Specification Double {Single} Ended:
Continuity and Short Circuits, less than 255K {75K} ohms
Open Circuits (end to end and between connected pins), greater than 255K {75K}
ohms.
Less than 2 {5} second test time
L 197mm W 110mm D 50mm
Uses 4 x AAA batteries (not supplied)

AudioJog Pro 8

Connectors:
3, 4 & 5 Pole XLR Male
6.35mm Jack, stereo or mono
Single or Twin 4.4mm Bantam, stereo or mono
3.5mm Jack, stereo or mono
4 & 8 Pole Speakon
DIN 3 & 5 (180°) & 8 Pole
RCA Phono
BNC
RJ45, Ethercon
USB A & B

Features:
There are 2 rows of 9 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections. 2 LED's indicate a good digital network connection, either Straight through, or Crossed over.

Memory option:
There are 4 LED's indicating the state of the MEMORY option.
If the MEMORY LED is on, then AudioJoG Pro 8 automatically scans all the connections
and compares against information held with just one press of the test button.
MEMORY works in both test modes.

Test modes:
Double ended - both ends of the cable under test are plugged into AudioJoG Pro 8.
Single ended - one end of the cable under test is plugged into AudioJoG Pro 8 the
other into another AudioJoG Pro 8.

Specification Double {Single} Ended:
Continuity and Short Circuits, less than 255K {75K} ohms
Open Circuits (end to end and between connected pins), greater than 255K {75K}
ohms.
Less than 2 {5} second test time
L 203mm W 150mm D 50mm
Uses 9v PP3 battery (not supplied) Continuity and Short Circuits, less than 255K {75K}
ohms.

AudioJog Rack

Connectors:
3 Pole XLR Male and Female
6.35mm Jack, stereo or mono
Single or Twin 4.4mm Bantam, stereo or mono
3.5mm Jack, stereo or mono
4 Pole Speakon (TM)
DIN 180° 3 & 5 Pole
RCA Phono
BNC

Memory option:
There are 3 LED's indicating the state of the MEMORY option.
If the MEMORY LED is on, then AudioJoG Rack automatically scans all the connections
and compares against information held with just one press of the test button.
MEMORY works in both test modes.

Test modes:
DOUBLE ENDED - both ends of the cable under test are plugged into AudioJoG Rack.
SINGLE ENDED - one end of the cable under test is plugged into AudioJoG Rack the
other into another AudioJoG Rack or the small hand held AudioJoG Pro.

Specification Double {Single} Ended:
Continuity and Short Circuits, less than 255K {75K} ohms
Open Circuits (end to end and between connected pins), greater than 255K {75K}
ohms.
Less than 2 {5} second test time
L 83mm W 483mm (19") D 45mm (1U)
Requires 9V dc Power supply (supplied)

VideoJoG

Features:
There are 2 rows of 21 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections.

Test Modes:
There are 3 LED's indicating the state of the MEMORY & TEST options.
If the MEMORY LED is off then pressing the test button will light one (or more) of the 42 LED's attached to each pin.
If the MEMORY LED is on, then VideoJoG automatically scans all the connections and compares against information held with just one press of the test button.

Connectors Left Side:
SCART
4way mini DIN
5way mini DIN
5way DIN
6way DIN

Connectors Right Side:
SCART
4way mini DIN
8way mini DIN
Phono x 6
BNC x 2

Specification:
Continuity(end to end) less than 4.7K ohms.
Short Circuits (end to end) and between connected pins, less than 4.7K ohms.
Open Circuits (end to end) and between connected pins, greater than 10K ohms.
Less than 5 seconds test time.
Non-volatile memory feature.
L 265mm W 223mm D 40mm.
Uses 4 x AAA battery (not supplied).

VideoJoG Adaptors:

	HR10/10A Adaptor Panels: HR10/10A 7R 4way HR10/10A 7R 6way HR10/10A 10R 12way HR10/10A 13R 20way Both male and female.

	2.54 SIPS Adaptor Panels: 2.54mm or 0.1" pitch connectors Colour coded Up to 21 ways 12 rows in parallel, allowing for either 12 different size/types of connector, or up to 11 spares ready for when the first wears out.

	3.96 SIPS Adaptor Panels: 3.96mm or 0.156" pitch connectors Colour coded Up to 21 ways 6 rows in parallel, allowing for either 6 different size/types of connector, or up to 5 spares ready for when the first wears out.

General:
Panels can be mixed and matched
Any connector can be wired into the SIPS panels