CableJoG 128 Cable Testers
CableJoG 128 cable testers can test up to 128 individual connections of all manufacturers of connectors. This simple test instrument stores up to 55 separate connection configurations. Each cable that is tested is compared with the configuration stored in the CableJoG 128 cable tester memory to produce a pass/fail indication of each pin connection.
Each test result can be transferred to a PC or printer via a comms link to store, tabulate and print test information from CableJoG software that is provided.
Each test unit can be configured to the customers requirements by producing a loom of connectors that the customer readily uses, therefore forming a versatile test instrument.
CableJog 128 cable testers technical information:
CONNECTOR PINS: 2 x 64way via a standard IDC header (2 x 34 each way)
KEYBOARD: 4 x 4 Keyboard; 0 to 9, 4 cursor keys, Clear & Enter
DISPLAY: 1 Line 16 Character Alphanumeric LCD Backlit Display
PROCESSOR Z80 CMOS: Real Time Clock and Serial I/O
MEMORY 32K EPROM, 32K RAM
- Integral 9V Nicad
- External 'Plug Top' 300 mA Power Supply
- 5 year Lithium [Memory Backup]
- Width: 310mm Length: 180mm Depth: 60mm
- CableJoG Command Programme (C.C.P.)
- Windows based Cable/Cable Harness Test and Document Programme
Plug in your cable and learn the connections. The connections and any default settings are held in compare memory.
Using a wire connected to one of the CableJaoG's pins it is possible to 'probe' or 'bell out' the a cable or partial cable where only one end is a connector available for connection to the unit.
Plug in another cable and run a comparison between it and the details held in compare memory. The test can be run once, looped till fail or continuously allowing several cables to be tested without further keystrokes or staged, where a cable can be tested to a given stage and, once passed the next stage is automatically loaded and testing continues until completed. Results can be displayed on the unit, printed out or saved and later transferred to a 'PC'.
Call up one of fifty five previously stored cable connection details.
Change or modify any of the cable details in compare memory; Connector pin numbers and locations, serial number, date and time stamp, type of test run, and cable connections.
Transfer details in compare memory to one of fifty five locations in the database memory.
Either ON-LINE for continuous result logging and label printing. Or OFF-LINE (batch mode) for when the unit is not connected to a printer.
Get cable details from the 'PC', which can hold an unlimited number.
Send cable dtabase to the 'PC' for achiving or transferring to another unit. Send cable test results to the 'PC' for further analysis.
Configure the unit to work the way you want.
Home - Cable tester Products - Cable Testers - Cable Testing Equipment - Technical tester data