Cable Testers

AudioJog Rack 8

Sensational NEW 19 inch 2U rack mount Audio/Lighting/Network cable tester with SINGLE & DOUBLE ended testing.

Connectors:
3, 4 & 5 Pole XLR Male & Female
6.35mm Jack, stereo or mono
Single or Twin 4.4mm Bantam, stereo or mono
3.5mm Jack, stereo or mono
2,4 & 8 Pole Speakon
DIN 3, 5 (180o) & 8 Pole
MINI DIN 4 Pole
RCA Phono
BNC
RJ45, Ethercon
USB A & B
BNC

Features of the AudioJog Rack 8:
There are 2 rows of 9 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections. 2 LED's indicate a good digital network connection, either Straight through, or Crossed over.

Memory option:
There are 6 LED's indicating the state of the MEMORY option.
If the MEMORY LED is on, then AudioJoG Rack 8 automatically scans all the connections and
    compares against information held with just one press of the test button.
MEMORY works in both test modes.

Test modes:
DOUBLE ENDED - both ends of the cable under test are plugged into AudioJoG Rack 8.
SINGLE ENDED - one end of the cable under test is plugged into AudioJoG Rack 8 the
    other into another AudioJoG Rack 8 or the small hand held AudioJoG Pro.

Specification Double {Single} Ended:
Continuity and Short Circuits, less than 255K {75K} ohms
Open Circuits (end to end and between connected pins), greater than 255K {75K} ohms.
Less than 2 {5} second test time
L 75mm W 483mm (19") D 88mm (2U)
Requires 9V dc Power supply (supplied)