Cat 5e Network Cable Testers

AudioJog Pro 8 Cat 5e Network Cable Tester

ALL new Audio cable tester with SINGLE & DOUBLE ended testing.

AudioJog Pro 8 Cat 5e Network Cable Testers

This is also a LAN cable tester and an Ethernet cable tester

Connectors for the AudioJog Pro 8 – Cat 5e Network Cable Testers
3, 4 & 5 Pole XLR Male
6.35mm Jack, stereo or mono
Single or Twin 4.4mm Bantam, stereo or mono
3.5mm Jack, stereo or mono
4 & 8 Pole Speakon
DIN 3 & 5 (180°) & 8 Pole
RCA Phono
BNC
RJ45, Ethercon
USB A & B

Features of the AudioJog Pro 8 Cat 5e cable tester:
There are 2 rows of 9 LED's corresponding to each of the possible connector pins of the AudioJog Pro 8 – Cat 5e Network Cable Testers and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections. 2 LED's indicate a good digital network connection, either Straight through, or Crossed over.

Memory option
There are 4 LED's indicating the state of the MEMORY option.
If the MEMORY LED is on, then AudioJoG Pro 8 automatically scans all the connections
    and compares against information held with just one press of the test button.
MEMORY works in both test modes.

Test modes for AudioJog Pro 8 Cat 5e Cable Testers:
Double ended - both ends of the cable under test are plugged into AudioJoG Pro 8.
Single ended - one end of the network cable under test is plugged into AudioJoG Pro 8 the
    other into another AudioJoG Pro 8.

Specification Double {Single} Ended:
Continuity and Short Circuits, less than 255K {75K} ohms
Open Circuits (end to end and between connected pins), greater than 255K {75K} ohms.
Less than 2 {5} second test time
L 203mm W 150mm D 50mm
Uses 9v PP3 battery (not supplied) Continuity and Short Circuits, less than 255K {75K} ohms.